top of page

Do I Run my Swimming Pool Pump When it is Raining

Mar 15

2 min read

0

1

0




Should I turn off my pool pump when it's raining?

Rain can change the chemical makeup of the water, such as the PH and alkalinity, in addition to adding dirt and debris. To keep your pool in the best condition, you can run the pump while it is raining. Running your pool pump during a lightning or electrical storm should be avoided as a power surge or nearby lightning strike could damage your pump.

However, running your pump during the rain can be beneficial most of the time. The extra filtering will help clean out the impurities rain has introduced into your pool's water. Pool pumps are made to withstand rain and it is beneficial to run your pump during or after rain.

If you have your pump located in a spot that has been known to flood, you should unplug your pump before it rains and switch it off at the breaker. Do not switch it back on until it has thoroughly dried out. Although pool pumps are usually waterproof and designed to withstand rain and splashes, they are not designed to be submerged in standing water.

Here's a quick summary:

  • Light rain = safe to leave pool pump on (if the manufacturer declares rainwater safe for the pump and you have no drainage issues)

  • Heavy rain = safe to leave pool pump on (if the manufacturer declares rainwater safe for the pump and you have no drainage issues)

  • Electrical thunderstorm = switch off and unplug all electrical devices in your pool

Benefits of running your pool pump in rain:

  • Circulates rainwater with the existing pool water

  • Filters out the impurities the rainwater brings 

  • Helps control algae 

In conclusion, you can run your pump continuously and it is beneficial. Running your pump for 24 hours will keep your pool crystal clear. If you do not run your pool pump long enough, you may end up with "dead spots." These dead spots are where uncirculated water stays and the dirt and debris in those areas will not make it into the filter.


"keywords": [

    "nw pool supply",

    "cleanpool",

    "|swimmingpool",

    "|poolrepair",

    "|poolmaintenance",

    "|azpoolsupply",

    "|familyowned",

    "|pooleducation",

    "|diypoolrepair",

    "|diypoolfilter,

    "|howtocleanpool”,

    "|repairpool”,

    "|poolsupply",

    "|maintenance",

    "|keepswimming",

    "|poolyoutube",

    "|supportlocals",

    "|poolcare",

    "|poolschool",

    "|poolsupplies",

    "|poolparts",

    "|poolpro",

    "|freeshipping",

    "|poolcleaner",

    "|poolguy",

    "|arizonapoolsupply”,

    "|lasvegaspoosupply”,

    "|texaspoolsupplly”,

    "|californiapool”,

    "|floridapool”

  ],

  "metadata": {

    "source": “NW Pool Supply”,

    "location": “Peoria, Arizona, USA"


Mar 15

2 min read

0

1

0

Comments
Couldn’t Load Comments
It looks like there was a technical problem. Try reconnecting or refreshing the page.
bottom of page